ADE RD3-006-B1 Green Dot Sight For Taurus G3 G3C TORO Optics Ready Pistol red

Description

Item Description
*******Instant Credit Card Checkout*********
*****FAST & FREE SHIPPING**************
Fits directly on
Taurus G3 G3C TORO
using
Taurus
provided "#01 mounting plate" marked for Docot/Vortex Venom Burris Fastfire type footprint red dot.
When you purchase a brand new
Taurus TORO G3/G3C
from the store, there are 4 mounting plates for optics that comes with the pistol in the manufacturer packaging. This sight fits one of these original
mounting plates
This red dot only fits DIRECTLY to Taurus TORO model, which is Taurus G3 or G3c newest Optics Ready pistol. If your G3 or G3C is NOT the TORO model, you will need to purchase the aftermarket optic plate to replace the rear sight in order to install this red dot.
Click HERE to send us a message of exact model of your pistol, we will let you know if you need a optic plate and we will provide a link of the plate you need.
We have pistol mounting plates for Berreta, S&W MP, Springfield XD, Colt 1911, Glock and HK USP, please copy the link below and open to see the mounting plates
https://stores.ebay.com/Opticsfactory/_i.html?_nkw=pistol+mount&submit=Search&_sid=826840444
Manufacturer Part# rd3-006b- IWI Masada
The green dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield.
Can also be used with a long range rifle scope for that perfect Backup System
The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings
Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery(Included)
Fully shockproof and fogproof.
Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture
Fully windage and elevation adjustable and lockable
3 MOA
5 Illumination Settings.
Powered by a lithium CR2032 battery(Included)
Magnification: 1X
Sight Window: 25mm x 16mm; .98" x .62"
Elevation Adustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)
Windage Adjustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)
Set Value for One Scale Division: 1 MOA or 1" @ 100 yds with 60 scale divisions per turn
Subtension of the Aiming Dot: 4 MOA (10.5 cm @ 100 m)
Parallax-Free Sighting Distance: approx. 50 yds
Recoil Resistance: At least 1000 Gs
Operating Temperature Range: -10°F to +130°F (-25°C to +55°C)
Storage Temperature Range: -40°F to +160°F (-40°C to +70°C)
Power Supply: 3V with one CR 2032 Lithium battery
Dimensions: L 2.0" x W 1.0" x H 1.1" (52 mm x 26 mm x 28 mm)
Weight (in operating condition without mounting materials): 0.9 oz (25 g).
Included:
Allen wrench to tighten fasteners
Screwdriver
Adjusting disc
Protective cap
3V Lithium battery (CR 2032)
Operating instructions
Weaver/Picatinny-style mount
Extra rubber sealing ring for battery compartment
This ADE RD3-006, alone with RD3-009,RD3-012,RD3-013 do NOT fit Springfield HELLCAT OSP, because springfield Hellcat OSP red dot footprint is based on Shield RMS. ADE sights has the footprint of Doctor/Vortex Venom type footprint.
This RD3-006, and RD3-009, RD3-012 and RD3-013 fits directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot. All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight.
When you first receive the red dot. It has a picatinny mounting plate pre-assembled. Please use allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately.
There are many popular handguns on the market, due to the size difference of the handguns, each mounting plate is slightly different in dimensions. There are also many manufacturers making a variety of handgun plates that replace the rear sight, including ADE, Lakeline LLC, EGW, and Outerimpact. The screw comes with our red dot come with a pair of M3x6mm screws to connect to the pre-assembled picatinny mounting base. Some mounting plates made by other companies for specific handgun might need a longer screw such as M3x8mm or shorter screw such as M3x4mm depends on the thickness of the mounting plate/adapter. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
Payment
We accept any payment method ebay allows such as paypal at the checkout.
Shipping
We ship all items within one business day of receiving cleared payments. For payments received by 2pm PsT(Pacific Daylight Time), the package usually ships in the same day.
Free shipping  within 1 business day with tracking number.
No international shipping!
Other
You can return any purchase that is Undamaged in like new condition within 30 days for full money back or exchange.
If you have any question, please click contact seller. We always reply emails within 8 hours.
Purchase Eligibility
We have to accept the fact that things are different than when we were younger, so please make sure you can legally order and possess this item BEFORE you submit your bid. All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item.