Andrew CommScope ATCB-B01-006 Control Cable AISG 1.1 / 2.0 6m

Description

Thank You for visiting
AerialUndergroundFiberCom
Inventory is in constant rotation if you have a material need you are not seeing posted feel free to reach out and I’ll do my best to take care of your needs wether it is Fiber Optic Cable or any related materials.
Shipping Rate is for non restricted Business Addresses with loading dock or forklift within Continental United States only I’m happy to quote elsewhere or for additional services such as lift gate or residential.
I have 33 more of these availability if interested
COMMSCOPE ANDREW SOLUTIONS | ATCB-B01-006
Teletilt AISG RET Control Cable, 6 m
MFR PART # ATCB-B01-006
Description
The ATCB-B01 Series control cables are used to feed data and power from the controller to the RET (remote electrical tilt) system components.; These cables are available in various lengths and are terminated with male and female connectors which allow them to be linked together to meet a required length. Andrew recommends grounding the RET control cable at the top of the tower using a junction box. A lightning protection unit should be used at the bottom of the tower to ground the RET control cable. In addition, Andrew recommends using a grounding kit for runs over 60 meters and at 60 meter intervals. The recommended grounding kit clamps onto the connectors, where two cables are joined together. As an example, the ATGK-001 grounding kit would be used where a 40 meter and 30 meter RET cable are joined to make a 70 meter run. Cable kits include two cables and one grounding kit and are available in total cable lengths of 70, 80, 90, and 100 meters. Full cable lengths of 70, 80, 90, and 100 meters are also available. The ATCB-B01 Series control cables are compliant to AISG and RoHS standards.
Features
Available in 24-inch (12RU), 36-inch (19RU), and 48-inch (26RU) heights
Swing out feature facilitates front and rear access for quick changes and maintenance
Standards compliant
Pre-mounted 12-24 Tapped Adjustable Rails
Supplied with 20 Equipment Mounting Screws
4-inch sub-panel with top and bottom cable access knock-outs
Rear subpanel features cable knock-outs with top and bottom access
Flush Side Panels: solid or vented
Flush Top Panels: solid, vented or pre-mounted with fans
Locking front and rear compartments, keyed alike
Optional Pre-Mounted Fans for Thermal Control
Cabinets ship fully assembled
Material: Steel
Finish: Durable Epoxy Power Coat Finish
Tech Info
ISO 9001:2008: Designed, manufactured and/or distributed under this quality management system; RoHS 2002/95/EC: Compliant by Exemption; AISG: Compliant; China RoHS SJ/T 11364-2006: Above Maximum Concentration Value (MCV)