Kegco Digital Homebrew Kegerator 2 Tap Ball Lock Keg Dispenser Black Stainless

Description

Kegco Digital Homebrew Kegerator 2 Tap Ball Lock Keg Dispenser Black Stainless
Designed with a black stainless steel door that provides easier cleaning and more resistance to smudges or fingerprints
Modified for home brewers interests, it features a complete ball lock keg dispense system that will allow you to tap two ball lock home-brew beer keg
Includes polished stainless steel two-faucet draft tower, two sets of ball lock keg couplers, empty CO
2
tank, and dual gauge regulator
Large interior holds up to three Cornelius home-brew kegs and can also be used as a fermentation chamber or an all-refrigerator
Fan-forced cooling and digital temperature display with intuitive controls provide one of the largest temperature ranges on the market
Description
Kegco's HBK309X-2 is an attractive dual faucet kegerator that allows you to dispense up to two of your favorite home brewed beers at the same time! It boasts all of the same great features as other high-quality Kegco draft beer dispensers, as well as a complete two-tap homebrew beer direct draw system that allows you to dispense two kegs at once. This dispense system comes with exciting upgrades like a two faucet stainless steel draft beer tower, commercial grade two product dual gauge regulator, and glossy red 5 lb. aluminum CO2 tank. The Kegco HBK309X-2 has been designed with a matte black cabinet and a sleek black stainless steel door for a modern look that complements any decor. Black stainless steel is a unique black-graphite tone that resists more smudges, fingerprints, water spots, and streaks than standard stainless steel. Most stainless steel surfaces do not have a fingerprint-resistant finish and will need special polish to keep them looking new. Black stainless steel can be easily cleaned without requiring any special polish - simply clean with a damp cloth followed by a soft towel.
Features
HBK309X-2 Dual-Faucet Home-Brew Beer Kegerator with Double-Tap Dispense System
Includes a brand new 5 lb. Aluminum CO
2
Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Commercial Grade Double Gauge CO
2
Regulator with Air Splitter
This two product regulator works with any CO
2
tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO
2
pressure is inside of the kegs. The side gauge measures the remaining volume of CO
2
in the tank, so you'll know when it's about time to get the tank filled. This regulator has an air splitter with two shut-off valves to deliver CO
2
to one or two kegs at the same pressure, and features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver.
Includes Two 5 Foot Lengths of 5/16 Inch I.D. Blue Air Line Assembly with 4 Worm Drive Clamps
These 5 foot lengths of 5/16" I.D. Blue Air/CO
2
Tubing are made of Thermoplastic Vinyl Hose (Super Vinyl). These will not rot, swell, or dry out, and are unaffected by normal cleaning compounds. Each air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver.
Includes Two Complete Ball Lock Home Brew Keg Tap Sets
These complete ball lock home brew keg tap sets include both gas in and beer out couplers for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.
Includes a 3" Diameter Dual Faucet Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two chrome plated faucets with brass levers and two 5 foot lengths of 3/16 inch I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included.
All dispensing accessories are UL recognized components
Holds up to three home brew beer kegs
Matte black cabinet with black stainless steel door
Digital temperature control keeps temperature in range of 32°F-75°F
Maximum Ambient Temperature: 100 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Can be set high enough for use as a fermentation chamber
Deep chill function quickly cools down warm kegs
Includes easy roll casters for mobility
Removable built-in drip tray with grill collects drips and spills, and can be easily cleaned in the dishwasher
Chrome guard rail helps prevent your mugs and glasses from sliding off
Stainless steel interior floor mat ensures long lasting durability and allows kegs to easily glide in and out
25% more energy efficient design saves you money every month!
Plugs into a standard home outlet
Warranty Information:
1 Year Parts and Labor
5 Years on Compressor (parts only)
SHIPPING INFORMATION
Unit usually ships 1-3 working days after receipt of payment.
Avoid Freight Charges! Winning bidder can pick up at our San Diego, CA Warehouse.
Item ships "Curbside Delivery" via common carrier; it is not the driver's responsibility to bring freight into house, garage, etc. Drivers do not assist with unpacking, set-up, or clean up.
Packages are sent Signature required.
Please include a daytime phone number in the shipping information at the time of check out
Most items ship out within 1-3 business days by FedEx or Common Freight Carrier. Large items are shipped via Motor Freight Standard curbside delivery. Most shipments take around 3 to seven business days for delivery. Items shipped via Common Carrier will have a flat rate shipping charge applied to that item. All standard deliveries will be brought to the door or threshold of your house or building. Your shipping includes insurance and all additional charges related to residential deliveries such as liftgates. If you require faster shipping or additional services such as flights of stairs or inside delivery, please contact our Customer Service Department for rates. Please contact us for special service deliveries. No shipments or deliveries are made on Saturdays, Sundays, and holidays.
BeverageFactory will not ship outside of the 48 contiguous U.S. states including Alaska and Hawaii, Puerto Rico or APO addresses and PO Boxes. Many of our items can be picked up at local warehouses to save on shipping. Please call us before you bid so we can confirm that it is available in your area.
Receiving Merchandise
When receiving shipments from Common Carrier it is recommended the Buyer have two people to help receive and move the item. All truckline deliveries must be inspected upon arrival. Please inspect the exterior of the packaging for damage. Make a note of any exterior damage on the bill of lading. Carefully remove all packaging and inspect the merchandise for dents, scratches, or other shipping damage. If there is damage, contact us immediately before accepting delivery. Save all packaging and do not destroy boxes etc. in case of return. You have 48 hours to file a damage claim. Claims filed after 48 hours of receipt may not be honored.
STORE POLICIES
We accept returns for items within the first 30 days of receiving your merchandise for any reason. We will not charge a restocking fee as long as you return them to us with the following conditions. You may return it for a prompt merchandise exchange, credit, or refund within 30 days of receiving your order as long as all merchandise is returned in new condition (unused and in original factory condition), with all original boxes (including all packaging materials), documentation, instructions, and accessories. All returns are subject to our inspection and approval. Personalized and custom items, and shipping and handling charges are non-refundable, and return shipping charges are the sole responsibility of the purchaser.
All returned merchandise must be accompanied by a valid Return Authorization Number. To initiate a return, please contact our Customer Service Department. Once you obtain your Return Authorization Number, you have 30 days in which to get the product back to us. You are responsible for arranging the return shipment of the product. We reserve the right to deny a full refund of the purchase price if the product is not returned in this manner. Items that are returned damaged or without proper packaging materials are subject to a 15% restocking fee. It is important to save all packaging and not destroy boxes in case of a return.
ABOUT US
This auction is placed by The Beverage Factory, a family owned business founded in 1997 and based in California. We offer unique products to make, store and dispense your favorite beverages! We bring over a decade of experience and knowledge from the brewing and beverage industry online. From our extensive line up of kegerators and wine storage units, to our water dispensers and draft beer parts, you'll find our specialized selection of beverage equipment second to none. We're committed to continually bringing unique and exciting beverage products and appliances to you at great low prices. In addition to our great product selection and low prices, we believe in direct access customer contact. When it comes to sales & service, we promise:
No voice mail...a person will always answer the phone during business hours.
Our staff will be knowledgeable, efficient and courteous when handling your sales and service needs.
We try to offer the prices will be the best anywhere.
Our goal is to provide a source where home owners, business owners, aficionados, and hobbyists can find beverage equipment and hardware to fulfill their particular needs. So whether you're building a home bar, designing a custom wine cellar or looking for a special gift, Beverage Factory would love to earn your business.
PAYMENT OPTIONS
Winning bidder can pay through PayPal or by credit card (Visa, MasterCard, Discover, American Express). Items paid for with Paypal must be shipped to the confirmed shipping address associated with your Paypal account. If you intend to ship to a different address please call in your payment by phone. We will need a deliver to phone number before we can ship your item.
CA residents must add sales tax to price. No Sales Tax is applied to purchases made outside the State of California.
LOCATION
The Beverage Factory
8510 Miralani Dr.
San Diego, CA 92126
Hours of Operation:
M-F 7am-6pm PST
Sat. 10am-2pm (sales only)